Home  ›  Wet Belt Replacement  ›  Ford 1.0 EcoBoost

FORD 1.0 ECOBOOST · WET BELT

Ford 1.0 EcoBoost wet belt replacement

From £850, with the water pump included. Timing belt and oil pump belt, seals, oil and filter, oil pump and strainer check. Every wet belt replacement comes with our own 12-month / 12,000-mile parts and labour warranty, honoured at our Royston and Swindon workshops.

From £850Water pump includedFord-spec 5W20 oil12-month / 12,000-mile warranty

Fixed-price quote. The price we quote is fixed. It only goes up if we find something else that needs doing, and we’ll always explain it and get your approval first.

New Dayco wet belt fitted to a Ford 1.0 EcoBoost at Enviro Repair

Which 1.0 EcoBoost engines we cover

The early 1.0 EcoBoost uses a belt-in-oil cam drive. Later revised engines switched the cam drive to a chain. Send the registration and we will confirm which layout you have before we quote.

Common wet-belt models include Fiesta (from 2012), Focus, B-Max, C-Max, EcoSport and Mondeo 1.0 EcoBoost. Puma 1.0 and many 2018-on facelifts may use the later chain cam drive. Ask us and we will check your vehicle.

A quick check: turbo at the front of the bay usually means wet belt; turbo at the bulkhead usually means chain. We still confirm from the vehicle, not the number plate alone.

Even on some revised engines the oil pump can still be driven by a small belt in oil. If that applies to your vehicle we will say so on the quote.

Not sure if your EcoBoost has a belt or chain? Read our belt vs chain guide.

Wet belt debris packed in a Ford EcoBoost oil filter housing

What we do

On a Ford 1.0 EcoBoost, the timing belt runs inside the engine, in the oil. When the rubber breaks down, small particles can block the oil pick-up and starve the engine of oil, which is why the belt is replaced on time.

We replace the timing belt and the oil pump belt, fit a new water pump and front case water seal, renew the crank front seal, friction washer and crank bolt, and fit a new rocker cover gasket, oil filter and Ford-spec 5W20 oil. The oil pump is removed and checked, and the strainer filter is removed and cleaned.

The job is from £850. We quote first. Every wet belt replacement comes with our own 12-month / 12,000-mile parts and labour warranty, honoured at our Royston and Swindon workshops.

What’s included, from £850

Timing belt and oil pump belt

New timing belt and new oil pump belt.

Water pump and seal

New water pump and front case water seal. The water pump is included.

Crank seal, washer and bolt

New crank front seal, friction washer and crank bolt.

Oil pump and strainer

Oil pump removed and checked. Strainer filter removed and cleaned.

Gasket, filter and oil

New rocker cover gasket, new oil filter and Ford-spec 5W20 engine oil.

Road test and warranty

Road test after the job. Every wet belt replacement comes with our own 12-month / 12,000-mile parts and labour warranty, honoured at our Royston and Swindon workshops.

Fixed-price quote. The price we quote is fixed. It only goes up if we find something else that needs doing, and we’ll always explain it and get your approval first.

When to book it

Ford originally talked about a long service life. With short-trip use we would rather change the belt between 60,000 and 80,000 miles, or at the first cold rattle, than wait for a light on the dash.

Typical early signs: metallic rattle from cold, oil pressure warning, rough idle, or debris already in the oil. If the belt has shed into the strainer the engine can be starved of oil. A replacement engine is a much bigger bill than £850.

From a real job

The old belt we took off a 2014 Ford 1.0 EcoBoost, and the new one fitted.

Old Ford 1.0 EcoBoost wet belt removed during replacement, heavily degraded

The old wet belt from a 2014 Ford 1.0 EcoBoost: heavily degraded

New Dayco wet belt fitted on a Ford 1.0 EcoBoost engine

The new wet belt fitted

EcoBoost questions

How long does it take?

Plan on your vehicle being with us for one working day. Drop it off before 9am and it’s generally ready the same day. If a Friday job isn’t finished that day, we’ll complete it on Saturday so it’s ready to collect. For a booked weekend job, drop it off by 9am on Saturday and it’ll be completed by Sunday. We offer free collection within 5 miles of the workshop. Further away? Ask us about collection.

Do you replace the water pump as standard?

Yes. The water pump is included in the from £850 price, along with the front case water seal.

Will a newer Puma or Fiesta need this?

Many do not use the same cam belt. Send the registration first.

What oil do you put back?

Ford-spec 5W20 for this engine. That is part of the from £850 price.

From our workshop

Photos from Ford 1.0 EcoBoost wet belt jobs: strip-down, oil system checks and the new parts going in.

Ford EcoBoost strip-down parts laid out during wet belt replacement at Enviro Repair
Ford EcoBoost with the covers off and the blue cam locking tools fitted at our Royston workshop
Ford EcoBoost crank seal replaced during wet belt job
Ford EcoBoost oil strainer removed for cleaning and inspection
Ford EcoBoost with sump removed showing the oil baffle and pump
Ford EcoBoost oil pump belt and sprocket seen from below with the sump off at our Royston workshop
Ford EcoBoost sump removed and cleaned during wet belt replacement
New wet belt fitted over the twin cam pulleys of a Ford EcoBoost at our Royston workshop

A Ford Fiesta 1.0 EcoBoost at our Swindon workshop

Photos from a Ford Fiesta 1.0 EcoBoost wet belt replacement at our Swindon workshop, from the car with its bonnet open to the cam cover coming off.

Silver Ford Fiesta 1.0 EcoBoost with the bonnet open in our Swindon workshop for a wet belt replacement

The Fiesta in our Swindon workshop with the bonnet open

Ford Fiesta 1.0 EcoBoost engine bay with the intake manifold and cam cover still fitted, before a wet belt replacement at our Swindon workshop

The 1.0 EcoBoost engine bay before strip-down, with the intake manifold and cam cover in place

Intake pipework, air box, heat shield, battery and hand tools laid out on the floor of our Swindon workshop during a Ford Fiesta 1.0 EcoBoost wet belt replacement

Intake pipework, air box, heat shield and battery removed and laid out on the workshop floor

Ford Fiesta 1.0 EcoBoost with the intake manifold removed and the cam cover exposed during a wet belt replacement at our Swindon workshop

The intake manifold off, with the cam cover exposed

Ford Fiesta 1.0 EcoBoost with the cam cover removed, showing the timing belt and camshafts, during a wet belt replacement at our Swindon workshop

The cam cover removed, with the timing belt and camshafts in view

Close-up of the camshafts and timing belt on a Ford Fiesta 1.0 EcoBoost with the cam cover removed at our Swindon workshop

A closer look at the camshafts and timing belt from above

EcoBoost automatic: gear-driven oil pump

On EcoBoost automatics the oil pump is driven by gears rather than its own oil pump belt. Photos from an automatic job at our Royston workshop.

Front of a Ford EcoBoost automatic engine showing the belt, tensioner, idler and gear-driven oil pump drive at our Royston workshop
Ford EcoBoost automatic oil pump gear drive seen from underneath at our Royston workshop
Ford EcoBoost timing belt, tensioner and pulleys during replacement at Enviro Repair

EcoBoost chain engine: wet oil pump belt

Timing chain, new oil pump, wet oil pump belt, sump and timing cover fitted at our Royston workshop. On EcoBoost chain engines the oil pump still runs on its own belt in the oil, so that belt ages in the same way and needs replacing on time.

Timing chain and cam sprockets on a Ford EcoBoost chain engine at our Royston workshop
New oil pump with the wet oil pump belt fitted on a Ford EcoBoost chain engine, sump off, at our Royston workshop
New sump and timing cover fitted on a Ford EcoBoost chain engine after the oil pump and wet oil pump belt replacement at our Royston workshop
New timing cover and sump on a Ford EcoBoost chain engine with a new oil pump and wet oil pump belt, at our Royston workshop

Other wet belt engines

from £650

PSA PureTech 1.2 wet belt

Peugeot, Citroën, DS and Vauxhall 1.0 and 1.2 PureTech petrol engines. Water pump not included: optional extra.

from £1,020

Ford 2.0 EcoBlue (Transit) wet belt

Transit, Transit Custom and other 2.0 EcoBlue diesels. Timing belt and oil pump belt, from £1,020, including the water pump.

Not sure?

Wet belt checker

Choose your make, model and year and we will tell you whether your engine has a wet belt.

All engines

All wet belt prices

PureTech from £650, EcoBoost from £850 and EcoBlue Transit from £1,020. Compare every engine we cover.

Book EcoBoost wet belt replacement

Call, WhatsApp or email us. We quote first and agree any extra work with you. Work is carried out at our Royston and Swindon centres.

GET IN TOUCH

Make a request

Phone: 0330 043 1303
WhatsApp: 0330 043 1303
Email: hello@envirorepair.co.uk

Opening hours
Monday to Friday, 8:30am to 5:30pm.
Saturday and Sunday: open by pre-arranged booking only (no walk-ins).

HERTFORDSHIRE

Royston centre

Unit 6, Block 2
Lower Gower Road
Royston
SG8 5EA

Royston centre: 01763 788763

Open in Google Maps

WILTSHIRE

Swindon centre

Enviro Repair Swindon
Unit 2 DE Unicorn Business Centre
Ridgeway
Swindon
SN4 0HT

Call 0330 043 1303

Open in Google Maps

Book your EcoBoost wet belt replacement

From £850 with the water pump included. Monday to Friday, 8:30am to 5:30pm. Saturday and Sunday: open by pre-arranged booking only (no walk-ins).